
General construction plant for concrete works and site power: petrol concrete road cutters, reverse-drum mixers with hydraulic charging skips, poker vibrators in electric and petrol versions, and silenced or open-frame diesel generators.
The vibrators in this line do one job with two power options. The ZW series electric poker carries a 50 mm head on a 4 m flexible hose, driven by a 2.2 kW motor on a 380 V three-phase supply. The 50 mm head is the size that suits reinforcement-dense sections such as columns, beams, walls and footings, and other head diameters and hose lengths are available on request.
The petrol frame vibrator is the alternative where there is no mains supply. A 3.8 kW four-stroke engine sits on a wheeled tubular frame and drives a flexible shaft poker on a hose of 4 to 10 m, so the machine is wheeled to the pour rather than the pour being sited around a power point. That is the whole difference between the two, and it is decided by the site rather than by the concrete.
The 350 L reverse drum mixer covers the batching end. It is a towable diesel unit with a hydraulic charging skip, so aggregate and cement are loaded mechanically instead of by shovel, and the drum reverses to discharge the mix under control. Water is metered at the machine from an onboard pipe, pump and control valve block rather than carried to it, and the chassis runs on pneumatic tyres with support legs for the mixing position.
Electric Concrete Vibrator 50 mm · Petrol Concrete Poker Vibrator · Reverse Drum Concrete Mixer 350 L
The 350 petrol road cutter is a push-type machine with a 350 mm blade cutting to a maximum depth of 80 mm at 5 to 8 m per minute from a 6.5 hp engine. Cutting depth is set with a screw-type handwheel, which is what makes a depth repeatable across a run, and a 6.5 L water tank feeds the blade for cooling and dust control. It weighs 65 kg and measures 850 × 450 × 750 mm, so it is one operator per cut, and the blade itself is quoted separately.
Cutting depth on this series is really a question of blade diameter rather than of how many passes are taken. The same machine steps up through a 400 mm blade for 130 mm of depth, 500 mm for 180 mm, 600 mm for 230 mm and 800 mm for 330 mm, so the depth you need decides which blade is fitted.
The generator covers the power side. The KOOP unit is an air-cooled single-cylinder diesel rated at 9.5 kW continuous and 11 kW maximum with an all-copper alternator, delivering 220 V single-phase and 380 V three-phase. It is supplied either silenced at 70 dB, in a canopy measuring 920 × 520 × 720 mm at 162 kg, or as a lighter open frame at 117 kg running at 90 dB. Fuel consumption is 1.5 L per hour, and the fuel grade is 0# diesel in summer and −10# in winter.
More questions are answered on the FAQ page.
The 350 mm petrol road cutter cuts to a maximum depth of 80 mm using a 350 mm blade. It is driven by a 6.5 hp petrol engine, travels at 5 to 8 m per minute, weighs 65 kg, measures 850 × 450 × 750 mm and carries a 6.5 litre water tank for dust suppression. The blade is supplied separately from the machine.
The drum turns one way to mix and the opposite way to discharge, so the operator controls the pour without tipping the drum by hand. The 350 litre model is specified with a diesel engine and a hydraulic skip, which lifts the batch to the drum. It is the machine for a site that pours small batches regularly rather than receiving ready-mix.
The open-frame version is rated at about 90 dB and the silent canopy version at about 70 dB. That difference is the reason the silent set weighs 162 kg against 117 kg for the open version: the canopy is a sound-attenuated enclosure, not a cosmetic cover.
It is rated at 9.5 kW continuous and 11 kW maximum, with 220 V and 380 V outputs at 43 A and 15 A respectively. It runs a 531 cc single-cylinder air-cooled diesel engine with direct injection, uses about 1.5 litres of fuel per hour and carries a 16 litre tank in the silent version or 12 litres in the open version.
It removes the air pockets that leave honeycombing in a wall or a column face. The electric unit uses a 50 mm poker on a 4 m hose from a 2.2 kW motor; the petrol unit uses a 196 cc, 4-stroke engine rated at 3.8 kW and can take a hose of 4 to 10 m, with a 3.6 litre fuel tank and 0.6 litre oil sump.
Tell us the capacity, the power supply you have and the destination port. We will confirm which model in this line fits and quote it with packing dimensions.