Baluster & Railing Moulds

ABS moulds for precast and cast-in-place concrete balusters and handrail posts, supplied five pieces to a set in European, modern and Chinese profiles.

One ABS set covering eight baluster heights

The renfa-1 casts balusters and handrail posts from an ABS mould set of five pieces, in eight heights: 660, 760, 850, 860, 880, 900, 930 and 950 mm. Each piece is 200 mm long, so a baluster is built up from the set rather than coming from a single full-height tool, and the same set covers both square and round profiles.

Pattern choice runs from M1 to M20, with the design styles listed as European, modern and Chinese. ABS is specified for impact resistance and repeated outdoor use, and the mould life is quoted at two to three years.

Concrete Baluster Mould renfa-1

How the mould is worked

The sequence is to oil and assemble the mould, thread the rebar through the rotary hole, pour, strip after about 35 hours and then finish the surface. That is a slower strip than a plain block mould, and the reason is the profile: a baluster is slender and carries a moulding, so the concrete has to gain enough strength to hold that shape before the mould comes off.

The same set works for precast and for cast-in-place work. Precasting produces the balusters in the yard and installs them finished, while casting in place forms them where they will stand. The choice depends on access to the railing line rather than on the mould.

Quantity, packing and delivery

The minimum order is one set, packed in a woven bag or a carton box. A single package measures 80 × 40 × 20 cm at 4 kg gross, and delivery is three to five days after payment. Because the set is light and small it ships economically, which matters when a baluster order is being combined with a heavier machine order.

Baluster & Railing Moulds — common questions

More questions are answered on the FAQ page.

Which baluster heights can the renfa-1 cast?

Eight heights: 660, 760, 850, 860, 880, 900, 930 and 950 mm. A set contains five pieces and each piece is 200 mm long, so a baluster is built up from the set rather than produced by a single full-height mould.

How is the mould actually used?

Oil and assemble the mould, thread the rebar through the rotary hole, pour, then strip after about 35 hours and finish. That is a slower strip than a plain block mould because a baluster is slender and carries a moulding, so the concrete has to gain enough strength to hold the shape. The same set works for precast and for cast-in-place work.

Is the profile square or round, and what patterns are available?

Both square and round profiles are covered by the same set, with M1 to M20 pattern profiles available. The design styles are listed as European, modern and Chinese.

What is the minimum order, and how long does the mould last?

One set, with mould life quoted at two to three years. Delivery is three to five days after payment, and a single package measures 80 × 40 × 20 cm at 4 kg gross in a woven bag or a carton box.

Send us your specification

Tell us the capacity, the power supply you have and the destination port. We will confirm which model in this line fits and quote it with packing dimensions.

WhatsApp / WeChat+86 189 0384 2606
ResponseQuotations sent within one working day