Manual Tile Cutter C10 — 1200 / 1600 / 1800 mm

Manual push tile cutter with an aluminium linear rail, four precision scales and laser positioning. Cuts tiles up to 15 mm thick in three rail lengths.

Max cut length1200 / 1600 / 1800 mmMax tile thickness15 mmCutting wheelΦ22 × Φ6 × 6 mm
PriceQuoted to your specification

Send the configuration, quantity and destination port and we will quote it with the packed dimensions and weight.

Key features

  • Manual operation — no motor, no water supply, no dust extraction needed
  • Four precision scales and a calliper gauge for repetitive cuts
  • Laser positioning line to align the cut before scoring
  • Segmented breaking action reduces chipping on large-format tile
  • Non-slip handles and carry points for moving large tiles on site

Quick answer

The C10 is a manual push tile cutter that scores and breaks tile up to 15 mm thick, in three rail lengths covering cuts up to 1,200 mm, 1,600 mm or 1,800 mm. It needs no motor, no water supply and no dust extraction, which is why it is used for dry indoor finishing work.

What is the largest tile the C10 cuts?

1,800 mm on the C10-1800. The three models are C10-1200 (1,200 mm), C10-1600 (1,600 mm) and C10-1800 (1,800 mm), and the maximum tile thickness on all three is 15 mm.

Can it make diagonal cuts?

Yes. Diagonal coverage is 85 × 85 cm on the C10-1200, 110 × 110 cm on the C10-1600 and 125 × 125 cm on the C10-1800. A triangular fence with a built-in scale handles the angle.

How does it handle large-format tile without chipping?

Breaking is multi-point loading with a segmented action rather than a single snap, and a laser line aligns the cut before scoring. Four precision scales and a calliper gauge make repeated cuts to the same size.

What does it cost?

On request - specify the C10 rail length. The SKU sizes stocked are 750 × 1000 mm and 800 × 800 mm tile formats.

Specification

Factory figures for the C10. Confirm the final configuration on your quotation — options listed here are quoted separately.

C10 — technical data
Cutting
Maximum cutting lengthC10-1200: 1,200 mm · C10-1600: 1,600 mm · C10-1800: 1,800 mm
Maximum tile thickness15 mm
Tile diagonal coveredC10-1200: 85 × 85 cm · C10-1600: 110 × 110 cm · C10-1800: 125 × 125 cm
Diagonal cuttingSupported
Cutting wheelHigh-strength alloy wheel, Φ22 × Φ6 × 6 mm
Body
Body lengthC10-1200: 1.6 m · C10-1600: 2.0 m
WeightC10-1200: 27.6 kg · C10-1600: 33.0 kg
RailAluminium alloy linear rail
BaseWidened base with rubber pads
Features
ScalesFour precision scales
FenceTriangular fence with built-in scale
MeasuringCalliper gauge
PositioningLaser positioning line
Bearing seatsAluminium bearing seats
BreakingMulti-point loading with segmented tile breaking
Supply
SKU sizes stocked750 × 1000 mm and 800 × 800 mm tile formats
PriceOn request — specify C10 rail length

Figures are factory data from the manufacturer's specification sheets and catalogue.

Where it is used

  • Cutting large-format porcelain and ceramic wall and floor tile
  • Diagonal cuts on skirting and feature tiling
  • Dry indoor finishing work where a wet saw is impractical

Ask a question about this machine

Your enquiry reaches the same person who handles production and loading, in English, the same working day.

Tell us the models, quantities and the destination port. Specifications on this site are factory data — send your requirements and we will confirm the exact configuration.

Prefer to write directly? Email dora@hzrenfa.com or message +86 189 0384 2606 on WhatsApp.