

Bench-mounted electric bender for forming stirrups, hooks and bent bars up to 40 mm, driven by a geared motor with a foot-pedal control circuit.
Send the configuration, quantity and destination port and we will quote it with the packed dimensions and weight.
The 40 mm electric rebar bender forms stirrups, hooks and bent bars up to 40 mm on a bench- or stand-mounted machine. A geared motor turns the working table forward and reverse under pedal control, so a preset angle can be repeated with both hands left free to hold the bar.
40 mm. It is the smallest of the three bending machines in the range; the 50 mm and 60 mm models take larger bar.
The working table rotates forward and reverse under a pedal switch, against a preset stop. Pedal control is what makes repeat work to the same angle consistent, because both hands stay on the bar.
Bench or stand mounted, with a working table, a centre pin and a roller mandrel set. It is not a hand tool and has to be fixed down before use.
On request. The configuration is quoted per destination, so send the bar sizes and the volumes you bend. It ships in a wooden case for sea freight.
Factory figures for the 40 mm capacity. Confirm the final configuration on your quotation — options listed here are quoted separately.
| Maximum bar diameter | 40 mm |
|---|---|
| Machine type | Electric bending machine with working table |
| Control | Forward / reverse with pedal switch |
| 40 mm model | This machine |
|---|---|
| 50 mm model | Available — larger bending table and motor |
| 60 mm model | Available — heavy-duty fabrication yard model |
| Configuration | Quoted per destination |
|---|---|
| Packing | Wooden case for sea freight |
| Price | On request — send your bar sizes and volumes |
Figures are factory data from the manufacturer's specification sheets and catalogue.
Your enquiry reaches the same person who handles production and loading, in English, the same working day.
Related guide: Rebar Cutting and Bending Machines: A Buyer's Guide