Enter the output you need per shift and this returns the smallest model in the range that covers it, plus every model side by side. Every figure is the factory-rated per-shift output published in the catalogue — nothing is estimated, and no figure is scaled to a different shift length, because the rating is per shift and not per hour.
R3-45 Directly Mobile is the smallest model rated to cover 5,000 standard bricks per shift — it is rated at 8,000, which is 60% above your target. 45-second cycle, 80 strokes per hour, 1.1 kW electric.
| Model | Cycle | Power | Standard bricks / shift | vs your target |
|---|---|---|---|---|
| R2-45 Small Mobile | 45 s | 1.1 kW electric | 3,600 | -28% |
| RD2-45 Diesel Mobile | 45 s | 8 hp diesel | 3,600 | -28% |
| R3-45 Directly Mobile← closest fit | 45 s | 1.1 kW electric | 8,000 | +60% |
| R4-45 Large Mobile | 45 s | 3.7 kW electric | 12,000 | +140% |
| R4-35A | 35 s | 4.8 kW electric | 15,000 | +200% |
| R4-35B | 35 s | 6.3 kW electric | 15,000 | +200% |
| R4-35AH with hopper | 35 s | 4.8 kW electric | 20,000 | +300% |
| R4-35BH with hopper | 35 s | 6.3 kW electric | 20,000 | +300% |
The rated output assumes the machine is fed on cycle and that finished blocks leave the pallet in time. A 35-second machine wants a fresh batch every 35 seconds; if the mixer, the sand or the cement delivery cannot keep up, the cycle stretches and the extra capacity is paid for but not used. Curing and pallet turnaround are the second limit, and power stability is the third — a machine that restarts through an unstable supply loses more than the rating difference between two models.
The full reasoning, including the five things that shorten a working shift, is in how many blocks a machine produces per day. If you want the figures checked against your own yard, compare two quotations first — the eight line items that matter are listed there.
The same machine is rated very differently depending on the mould box fitted. A standard brick is 240 × 53 × 115 mm and a hollow block is 390 × 190 × 190 mm, so the block is several times the volume and the piece count falls accordingly. Switching the profile above shows both ratings for every model — that gap is the mould, not the machine.
Send the block profile, the output you need per shift and the power supply you have. We will confirm which model covers it and what the mould box has to be.